The real fun stuff started today aboard "DragonQuest". Jon is fully suited and protected from all the fiberglass dust he is creating. And well, because he is better with the cutting tool, I'll just wait till the itchy part is over đ After cutting out the skin, we will remove the old core, prep the remaining cabinside laminate, measure and fit the new honeycomb core then prep everything for the install tomorrow.
We are replacing the core from the inside on the cabinsides because the interior headliner and cabinsides were cracking and where in need of replacemnt AND doing it this way we limit the amount of shaping, filling and fairing we will have to do before painting the boat with Awlgrip. **This is not Prism**
.
.
.
#diy #diyrefit #boatproject #boatyard #sailboatrefit #sailboat #hanschristiansailboat #hanschristian33t
2 thoughts on “Bruntons Sigma Drive”
Our Moody 47 goes back into the water Saturday with the Autoprop and Sigma Drive you recommended I install with it. We have not replaced the engine and trans so should have a good comparison to pass along.
Keep us in the loop! I would love to see what you think! Shoot some photos over when you get a chance to hc33prism@gmail.com, would love to post your findings when I do the write up.
Cheers,
Jon